VS-150 Snap-Lock Standing Seam
Specifications:
| Application | Architectural, residential and commercial panels. |
| Coverage | 9″-24″ panel coverage, with a 1 1/2″ seam height. |
| Minimum Slope | Recommended slope 2/12 or greater. |
| Substrate | Recommended subsate 1/2″ – 5/8” plywood with a minimum 30 lb. underlayment. |
| Length | Panels are continuous lengths from eave to ridge. |
| Fastening System | Concealed clip and fastener system. Recommended 2 screws per clip with a maximum clip spacing of 16” o/c. |
| Fasteners | #10 x 1” flat head screws. |
| Materials | Panels are fabricated from 26 gauge or 24 gauge Galvalume* as well as .032 Aluminum |
| Coatings & Finishes | 26 gauge pre-painted Galvalume* panels are available in a variety of colors. 24 gauge pre-painted Galvalume* panels are available in a variety of colors and coated with a full-strength Kynar 500. |
| Warranty | 20, 25, and 35 year manufacturer warranties available. |
| Approvals & Testing | Florida Building Code and Miami-Dade HVHZ product approvals, TAS 125 (UL-580 uplift resistance test), TAS 100-95 (wind driven rain test), Class A Fire Rating (UL-790), Quality Assurance Program. |
ADDITIONAL PANEL INFORMATION
- Panels with striations available upon request.
- Double and Multi Striated profiles help reduce “oil canning”.
- 26 gauge is offered in Multi Striated only
- Panels are also available in Aluminum and Copper.
- All flashings and accessories are fabricated from the same coil stock as the panels.
- Standing Seam orders are all inclusive: panels, clips, screws, and all flashings are incorporated into one per square price.
* Galvalume sheet uses an aluminum (55%) – zinc (45%) alloy coating that offers greater corrosive resistance, higher temperature oxidation resistance, and higher heat reflectivity than standard galvanized steel.
† Kynar 500 is a premium fluorocarbon coating, produced with full strength Kynar 500 resin. This affords maximum exterior durability due to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available.
VS-100 Snap-Lock Standing Seam
Specifications:
| Application | Architectural, residential and commercial panels. |
| Coverage | 9″-24″ panel coverage, with a 1 “ seam height. |
| Minimum Slope | Recommended slope 2/12 or greater. |
| Substrate | Recommended subsate 1/2″ – 5/8” plywood with a minimum 30 lb. underlayment. |
| Length | Panels are continuous lengths from eave to ridge. |
| Fastening System | Concealed clip and fastener system. Recommended 2 screws per clip with a maximum clip spacing of 16” o/c. |
| Fasteners | #10 x 1” flat head screws. |
| Materials | Panels are fabricated from 26 gauge or 24 gauge Galvalume*. |
| Coatings & Finishes | 26 gauge pre-painted Galvalume* panels are available in a variety of colors. 24 gauge pre-painted Galvalume* panels are available in a variety of colors and coated with a full-strength Kynar 500. |
| Warranty | 35 year manufacturer warranties available. |
| Approvals & Testing | Class A Fire Rating (UL-790), Florida Product Approval, Quality Assurance Program |
ADDITIONAL PANEL INFORMATION
- Panels with striations available upon request.
- Double and Multi Striated profiles help reduce “oil canning”.
- Panels are also available in Aluminum and Copper.
- All flashings and accessories are fabricated from the same coil stock as the panels.
- Standing Seam orders are all inclusive: panels, clips, screws, and all flashings are incorporated into one per square price.
* Galvalume sheet uses an aluminum (55%) – zinc (45%) alloy coating that offers greater corrosive resistance, higher temperature oxidation resistance, and higher heat reflectivity than standard galvanized steel.
† Kynar 500 is a premium fluorocarbon coating, produced with full strength Kynar 500 resin. This affords maximum exterior durability due to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available.
1″ Mini Batten Standing Seam
Specifications
| Application | Architectural, Residential, and Commercial panels |
| Radius Application | Panels and battens can be formed for installation on curved substrates, convex or concave |
| Coverage | Panels are available in various widths ranging from 14″ to 24″, with pan and batten seam height of 1″. |
| Minimum Slope | Recommended slope 2/12 or greater. |
| Substrate | Recommended subsate 1/2″ – 5/8” plywood with a minimum 30 lb. underlayment. |
| Length | Panels are continuous lengths from eave to ridge. |
| Fastening System | Concealed clip and fastener system. Recommended 2 screws per clip with a maximum clip spacing of 12” o/c or 16″ o/c depending on panel width. |
| Fasteners | #10 x 1” flat head screws. |
| Materials | Panels are fabricated from 24 gauge Galvalume*, .032 Aluminum, 16 oz. Copper |
| Coatings & Finishes | 24 gauge Galvalume* and .032 Aluminum pre-painted panels are available in a variety of colors and coated with a full-strength Kynar 500 |
| Warranty | 20, 25, and 35 year manufacturer warranties available. |
| Approvals & Testing | Class A Fire Rating (UL-790), Florida Product Approval, Quality Assurance Program |
ADDITIONAL PANEL INFORMATION
- All flashings and accessories are fabricated from the same coil stock as the panels.
- Standing Seam orders are all inclusive: panels, clips, screws, and all flashings are incorporated into one per square price.
- DCSM 1″ Mini Batten is most commonly used on curved and radius projects. Available in a variety of metals and colors.
* Galvalume sheet uses an aluminum (55%) – zinc (45%) alloy coating that offers greater corrosive resistance, higher temperature oxidation resistance, and higher heat reflectivity than standard galvanized steel.
† Kynar 500 is a premium fluorocarbon coating, produced with full strength Kynar 500 resin. This affords maximum exterior durability due to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available.