Specifications
| Application | Fabricated from 26 gauge pre-painted Galvalume in 10′ lengths. |
| Materials | Fabricated from 26 gauge Galvalume*. Also available in aluminum and 16 oz copper. Standard Drip Edge available from 90˚ to 7/12 pitch. Manufactured with a 2″ or 2 1/2″ face at 90 degrees. |
| Colors | Available in white, brown and mill finish. Also available in all matching colors with DCSM tile metal eave closure. |
| Coatings & Finishes | Baked-on AZ-55 Akzo Nobel Ceram-A-Star 950 paint finish. |
* Galvalume sheet uses an aluminum (55%) – zinc (45%) alloy coating that offers greater corrosive resistance, higher temperature oxidation resistance, and higher heat reflectivity than standard galvanized steel.
† Kynar 500 is a premium fluorocarbon coating, produced with full strength Kynar 500 resin. This affords maximum exterior durability due to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available.