NL-1500 Snap-Lock
Specifications
| Application | Architectural, Residential, Commercial and Institutional panels |
| Coverage | 16″ panel coverage, with a 1 1/2″ seam height. |
| Minimum Slope | Recommended slope 2/12 or greater. |
| Substrate | Recommended subsate 1/2″ – 5/8” plywood with a minimum 30 lb. underlayment. |
| Length | Panels are continuous lengths from eave to ridge. |
| Fastening System | Concealed clip and fastener system. Recommended 1 screw spaced 8” o/c. |
| Fasteners | #10 x 1” flat head screws. |
| Materials | Panels are fabricated from 24 gauge mill finish or prepainted Galvalume. |
| Coatings & Finishes | 24 gauge pre-painted Galvalume* panels are available in a variety of colors and coated with a full-strength Kynar 500 finish. |
| Warranty | 30 year manufacturer warranty. |
| Approvals & Testing | Florida Product Approval, Class A Fire Rating (UL-790), Quality Assurance Program. |
ADDITIONAL PANEL INFORMATION
- Panels are also available in 26 gauge Galvalume, Aluminum and 16oz Copper.
- All flashings and accessories are fabricated from the same coil stock as the panels.
- Standing Seam orders are all inclusive: panels, clips, screws, and all flashings are incorporated into one per square price.
* Galvalume sheet uses an aluminum (55%) – zinc (45%) alloy coating that offers greater corrosive resistance, higher temperature oxidation resistance, and higher heat reflectivity than standard galvanized steel.
† Kynar 500 is a premium fluorocarbon coating, produced with full strength Kynar 500 resin. This affords maximum exterior durability due to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available.